1 Installation: install the faucet before the water should be within the residual dirty water, residue, sand and impurities wash clean, then install the faucet to prevent foaming obstruction or valve is damaged.

2 cleaning: regular use of cleaning agents to scrub the surface decontamination, first scrub before rinsing with clean water faucet surface and wipe dry with a soft cotton cloth, together with a neutral cleaner and gently wipe the surface clean to maintain its form, do not use any abrasive cleaners, hard cloth, paper towels or wire ball, and any acidic, harsh detergent or soap wipe the faucet surface thereof.

3 filters: the bubble head removed, remove the filter, with a toothbrush under the tap or small brush, scrub the filter;

[DDB] Bathroom Tips

A company insist on honesty, not marketing of fake and shoddy goods. Please rest assured purchase!

2 company sells goods to ensure the quality, if quality problems can be returned within 7 days. Buyers provide valid proof in the case where the package is intact does not affect the second sale under the premise can be returned. Costs arising from return paid by the buyer. The quality of the company responsible for surface mail costs not included.

3 Our products are taken in kind of image, but because of lighting and displays, exhibits and photos may not be exactly the same (but usually pretty physical than the picture), all to prevail in kind. If you still have a problem, please contact the company telephone consultation. We will be happy to serve you.

[DDB bathroom Tips] any kind of faucet products without the use of the switch during use excessive force, just gently twist or can toggle on the hood outlet configuration screen by the use of some products after rinsing time should be disassembled to remove impurities. With hose products should pay attention to the natural stretch hose keep state, so as not to break.

  By the use of taps sometimes happen soon is not completely closed, leakage, handle loose, loose connector leakage phenomenon, under normal circumstances the consumer can be resolved. Just remove the steady rise occurred in the spiral tap rubber is not completely closed, usually due to hard debris card into the Howling sealing port when the handle (hand wheel), unscrew the valve cover, the valve after removal of impurities as its origin good can resume normal use. Occurs in ceramic seal faucets valve closure is not complete, it may be hard sealing surface scratches or debris on the spool applied preload is not enough. If the former, only the faucet manufacturer service department or a professional repair service department. Then a question by the user simply remove the handle (hand wheel) will spool and then tighten slightly.

Handle (hand wheel) loose general for two reasons: First, when the assembly is not inadvertently handle (hand wheel) fastening a good, simply tighten the fixing screw. Second, the handle (hand wheel) selection is poor, mostly occurs in the handle (hand wheel) and the valve connecting portion premature oxidation, leading to corrosion caused by the gap increases, usually no remedy. So, as far as possible not to use low-level or low-quality handle (hand wheel) products.

In case of leaking faucet joints it is usually not part of the assembly time due to tight tighten, just tighten. Sometimes, a faucet in all aspects compared perfect, but closed after the drip stop feeling. Then the length of time depends on the drip, drip stop, and whether the number of water droplets. Sometimes longer drip time may last 4,5 minutes, the total number at about a dozen drops. The amount of water is equivalent to a drop of water close after more than water faucet spout inside, is a normal phenomenon.

Properly used, maintenance well, in order to maintain long-term as new faucet.

     Chela prevented plated faucet at no rust. As long as there is a relationship with the water appliances, bright silver upper part is mostly done nickel-chrome plating process. The main purpose of plating decorative and rust, but does not indicate whether it stood will never rust. There are a lot of naked eye can not distinguish between small hole (pinhole) on the plated layer. If wet or corrosive gases from coming in here, beneath the material will rust oozing to the surface. Like these often touch the faucet part is very easy to rust, because grease hand will unconsciously crept over the entire faucet, thereby covering the holes, corrosion material faucet plated layer at the bottom. Thus a month with wax plated plug wipe these parts, we can protect the faucet plated layer. Household faucets should pay attention to regular cleaning faucet. Faucet surface should be kept in a soft cloth (not with impurities) dip gently wipe with a cleaning agent. Avoid using metal wire or group with hard particles scouring cloth. In addition, the phase must not hit that hard bumps faucet surface.

The scope of application

Home, bathroom, leisure and entertainment, luxury hotels, hotels

[Service]

1. goods if quality problems, the shop is willing to be responsible for replacement. (Shop for goods and manufacturers have the right to question whether the quality of the final appraisal)

2. Goods by man-made damage, use cases, quality problems caused by improper installation, etc., are not allowed to return, after we confirm the extent of damage to determine whether the exchange, caused by customers for replacement costs incurred, shall be borne by the buyer .

3. In order to avoid the exchange of goods resulting from the sale of stock, damage, loss, use a courier 
4. timely identify the reasons for the turnover of goods and, in the case of the above questions, please within 24 hours after receipt of goods the company proposed and sent the same day .

Description: Instructions for replacement; within 30 days from the date of receipt of the documents of the logistics can be change (quality problems under normal circumstances) goods, replacement please return logistics documents and photos water. Man-made reasons, this is not abnormal use within reason.

All merchandise returned due to quality problems, please clip a piece of paper in it, write "Want No" "Completion Date", "reason for the return."

[Solemnly affirm] 
1. In order to avoid all kinds of trade disputes, please read the above content carefully before photographed, photographed shop merchandise that is willing to accept and carry out